Adhesive for rubber profiles

  • 128 NOK

In stock
Article Number: EP-001
Share

Description

  • Reproduced part
  • Suitable for
    -
  • Glue for attaching rubber seals to the body (trunk seals, door seals, etc.)
  • Sold in two sizes:
    - 70 ml tube
    - 350 ml can with brush

  • Areas of application
    Suitable for bonding small and large surfaces on interior and exterior surfaces, such as rubber profiles, solid rubber, foam rubber and natural rubber, as well as leather, linen, felt, hard PVC and butyl rubber. Can also be used in combination with wood, fiber cement boards and metals (steel, steel sheets and aluminum) and much more.
    Used in the automotive industry (door rubber, weatherstrips, panels, insulation mats and foils, etc.), in caravans, boats, industry, the craft industry and for household purposes.
    Apply the adhesive evenly to both surfaces to be bonded. Observe the flash-off time and recommended application temperature.

  • Danger symbols

    Contains: Ethyl acetate, hydrocarbons C6–C7, isoalkanes, cyclic compounds, < 5% n-hexane, acetone / Covered by Annex II to Regulation (EU) 2019/1148.

    H225:   Highly flammable liquid and vapor.
    H319: Causes serious eye irritation.
    H336:   May cause drowsiness or dizziness.
    H411: Toxic to aquatic life with long lasting effects.
    EUH066:   Repeated exposure may cause dry or cracked skin.
    EUH208: Contains rosin. May produce an allergic reaction.

    P261:   Avoid breathing vapor/spray mist.
    P271: Use only outdoors or in a well-ventilated area.
    P102:   Keep out of reach of children.
    P280: Wear eye/face protection.
    P405:   Keep locked up.
    P501: Dispose of contents/container to waste disposal in accordance with local/national regulations.
    P101:   If medical advice is needed, have the product container or label at hand.
    P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
    P305 + P351 + P338:   IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
    P403 + P233:   Store in a well-ventilated place. Keep container tightly closed.


  • Group No. 1504915
  • GM number : -

Technical data sheet is available here

Technical data sheet is available here